Enviro Measuring & Testing Instruments

• EPA Omni-Directional ambient particle inlet with 10 Separation assembly & Sample transport tube.
• programmable Real Time Control System With Automatioc Start & Stop & digital display of date & time of Sampling
• 20x4 LCD display showing parameters in real time
• Flw Rate [ 16.67] LPM, Volumetric Flow
• Barometric Pressure, Ambient Temperature

Additional Information:

Item Code: PM10

• Wireless Weather Station with rugged construction for rough weather
• Measurement of following Parameters:-Wind Speed, wind direction, Rain bucket, Solar Radiation, Temperature, Humidity, Atmospheric pressure with wireless data logger solar panel mounting Accessories
• Historic Data Available date wise from this server.Also Saved in a Micro Sd Card placed inside the Base Receiver

• Modular design , uses latest technology to meet individual client's expectation by adjusting it to performing particular measurement such as concentration of various gases ,pressure, temperature and number of boiler parameter
• 1 to 4 analyzer from measures CO, Co2 CH4, N20, with NDIR and 02, CO, NO, No2 S02, H2S, with electrochemical sensor
• Measures atmospheric pressure, differential pressure, temperature, lambda, qA , Eta.
• Data logging with 256Mb M MC and PC program for analyzer setting and data communication and present result onLCD

• Total Solution for Boiler Efficiency Analysis
• Measures 02 , CO, 50x,NOx & Stack Temperature
• Calculates CO2 , Efficiency, Losses, . Excess Air,Net Temperatui,CO/Co2 Ratio & Poison index.
• Unit in ppm & mgim3

• Continuous stack emission
• Analyzer based on ND1R /UV technology for measurement of 1-6 gases from NOx, N 02 S02, CO, Cod, NH3, HCL, HF, HC, CH4, BTX etc
• From emission 02 by paramagnetic izirconia measurement probe is installedin stack and analyzer in the room connected with sample line measures high range % to ppm levels or low range ppm to ppb levels
• Fast response time
• High sensitivity
• High precision
• Low drift and easy to maintenance
• Simultaneous display of all measured values on large LCD reduces operation cost due to small gas consumption by dry calibration

• Energy efficiency
• Compensation with high back pressure
• Programmable timing

• Multiple-tube sampling capability
• Compensation with high back pressure
• Quiet-running package
• Wide range of flow rates
• Energy efficiency
• Programmable timing
• For all Solid, liquid & gas sampling

• Easy handling
• Compact design
• Long working life

• Direct continuous measurement of opacity or optical density
• Small, lightweight and easy installation
• No moving parts and simple optics for long life operation
• Light source is a semiconductor laser
• Adjustable alarm values and alarm relay

• Linear voltage output 0...1V and current output 4 ... 20mA
• Digital LCD-display and analogue display for D-value
• 4 operation ranges (...0...0,03 D, 0...0,1 D, 0...0,3 D, 0...1,0 D)
• Low maintenance requirements and small physical size due to simple optics

• Quantifying off-site particulate migration
• Surveying for PM2.5 and PM10
• Monitoring dust generation during drilling and excavation
• Evaluating dust suppression and engineering controls
• Locating and identifying "hot spots"
• Emergency response and fugitive emissions compliance
• Determining level of respiratory protection
• Survey of workplace for OSHA/EPA compliance
• Evaluating worker exposure to airborne contaminants
• Dust collector/ventilation system checks
• Monitoring lung-damaging particles in factories and buildings

Other Details:

• Evapotranspiration (ETo)
• Wind Speed and Direction
• Rainfall
• Dew Point
• Solar Radiation
• Air Temperature
• Relative Humidity
• Upto 5 external sensors

• (Length x Width x Height) 185x90x40mm
• Weight 470g (complete with batteries)
• Materials ABS, rubber
• Display 2x4½ digits plus symbols
• Visible area: 52x42mm

• Operating Temperature : -5... to 50°C
• Storage Temperature : -25... to 65°C
• Working relative humidity 0…90% RH without condensation

• Batteries 4 1.5V type AA batteries
• Autonomy 200 hours with 1800mAh alkaline batteries
• Power absorbed with instrument off 20μA
• Mains Output mains adapter 12Vdc / 1000mA
• Measuring unit °C - °F - %RH - g/kg - g/m3 - hPa - J/g - Td Tw - DI - NET
• Security of stored data Unlimited, independent of battery charge conditions
• Time Date and time In real time
• Accuracy 1min/month max drift

• Is a multifunctional handheld board instrument and datalogger.
• It is provided with a 128x64 pixel (56x38 mm) graphic display and three independent inputs.
• Each input can be connected to one channel or two channel dual probes (ex. two thermocouples, relative humidity/temperature, etc.).
• The instrument automatically recognises SICRAM probes connected to the input (memory equipped and configurable intelligent probe).
• Functions: watch, hold, max., min., average, record, immediate or deferred start record logging, difference between the two inputs, relative measures, three input channel measurement and inside reference temperature display.
• Sampling time: one per second/input.
• Probe calibration through SICRAM module; calibration data permanent storage inside the probe.
• Storage capacity: 32.000 readings per input.
• Storage interval and printing can be configured between one second and 1 hour. RS232C serial output: from 300 up to 115.200 baud rate.
• Immediate or deferred print-out. Stored data can be displayed and stored data blocks can be deleted.
• Automatic shutout after 8 minutes can be disabled.

• Hand-transmitted vibrations 
• Whole-body vibrations 
• Building vibrations

• 
  Noise monitoring with sound event capture and analysis function
• 
  Environmental noise measurement, Assessement of
  noise tones even if they are at a frequency located between two standard third octave band filter.
• Assessment of audibility of spectral components through real time comparison with equal loudness curve.

• Possibility to log time profiles of 6 simultaneous parameters freely selecting time or frequency weightings.  
• Possibility to store the multi-parameter sound level analysis for more than 46 hours. 
• Different time recordings can be recalled from internal memory and displayed and replyed by using reply function.
  intervals of 1s to 1h, report sequences with dedicated parameters, average spectra and full statistical analysis.
• A versatile trigger function allows to identify sound events and store results with 5 dedicated parameters, average spectra and statistical analysis.

• 
  Unit of Measurement °C,°F,°k configurable.
• 
   storage stops when the available memory is full. 
• Consumption @6VCD

• Operating temperature -5 … 50°C 
• Storage temperature -25 … 65°C 
• Working relative humidity 0 … 90% RH no condensation 

• Security of data stored : unlimited 

• Sensors: they are placed at the measuring points and convert the values of the physical quantities into electrical analog or digital signals.
• Acquisition system: it reads and logs the electrical signals outgoing from the sensors. If the acquisition system is digital, the acquired values are kept in the system’s internal memory until the memory is full.
• PC: the transfer of data from a digital acquisition system to a PC allows storing the measured values even after the internal memory of the acquisition system is full. The PC also allows processing and analyzing the acquired values.

• Quick and easy installation: as it is not necessary the laying of cables and conduits, a wireless system is installed much more easily and quickly than a wired system, especially when the components are at a great distance from one another.
• Reduction of installation costs: the absence of cables allows a considerable saving in cost of material and labor.
• 
  Flexibility of the system: the absence of fixed links between the various parts allows moving the system components at any time without problems
• 
  Low maintenance: the cables are subject to deterioration over time, the absence of cables reduces the maintenance costs of the system.

1. By an acoustic signal generated by the buzzer inside the devices.
2. By highlighting the measures with errors on the PC monitor by means of the HD35AP-S software.
3. By sending an SMS to the set phone numbers (only with the base unit HD35APG).
4. By sending an alarm e-mail to the set addresses (only with the base units HD35APG and HD35APW).
5. By activating additional signaling or actuators via the optional remote alarm module HD35ED-ALM with relay outputs.